Techpace Solutions

Key Benefits at a Glance

• Strong metallic housing in cylindrical shape M18 x 1
• Operating distance adjustable
• Not sensitive to ambient light
• Degree of protection IP67
• High operating distance

• Sensing method: Diffuse mode.
• Sensing range: 0 to 200 mm (adjustable).
• Light source: Infrared LED.
• Output type: NPN, light-on switching function.
• Operating voltage: 10 to 30 V DC.
• Connection method: M12 connector (model number ending in "-V1").
• Housing material: Nickel-plated brass.
• Ingress protection: IP67.
• Operating temperature: -40 °C to 60 °C.
• Adjustment: Sensitivity can be adjusted via a control element on the senso

• Sensing method: Diffuse mode.
• Sensing distance: 0 to 500 mm (adjustable).
• Light source: Infrared LED (IRED).
• Light type: Infrared.
• Light spot diameter: Approximately 52 mm at 500 mm.
• Supply voltage: 10–30 V DC.
• Output configuration: NPN—Light-ON (open collector).
• Switching current: Up to 100 mA, resistive load.
• Response time: ≤ 1 ms.
• Switching frequency: 500 Hz.
• Connection: 2m fixed cable.
• Housing: Cylindrical M18 x 1 threaded brass, nickel-plated.
• Protection rating: IP67.
• Operating temperature: -40 to 60 °C (-40 to 140 °F)

• Sensing method: Diffuse mode
• Sensing distance: 0 to 500 mm (adjustable)
• Light source: Infrared LED
• Operating voltage: 10 to 30 V DC
• Output configuration: PNP - Light-ON
• Connection: Wired with a 2-meter cable
• Response time: 1 ms
• Switching frequency: 500 Hz
• Operating temperature: -40 to 60 °C (-40 to 140 °F)
• Ingress protection: IP67

We are a dealer and supplier of Pepperl Fuchs OBT500-18GM60-E5 Sensor in India.

• Type: Polarized retroreflective photoelectric sensor
• Sensing range: 0.01 to 5 meters (10 to 5,000 millimeters), with a threshold detection range of 7 meters.
• Light source: Modulated visible red LED, which makes the light spot easy to see for alignment.
• Output: 1 PNP output, short-circuit protected, reverse polarity protected, and open collector.
• Switching type: Adjustable light-on/dark-on, with light-on as the default setting.
• Switching frequency: 1000 Hz.
• Supply voltage: 10 to 30 V DC.
• Connection: 4-pin M8 x 1 connector.
• Protection rating: IP67, protecting it against dust and water immersion.
• Operating temperature: -30°negative 30 degrees−30°C to +60°positive 60 degrees+60°C.
• Housing material: Polycarbonate (PC).
• Dimensions: 31 x 11 x 20 mm (H x W x D)

Key Benefits at a Glance

• Strong metallic housing in cylindrical shape M18 x 1
• Operating distance adjustable
• Not sensitive to ambient light
• Degree of protection IP67

• Sensor type: Triangulation sensor with background suppression.
• Detection range: 10 to 150 mm, with a minimum range of 10 to 40 mm and a maximum of 12 to 150 mm, according to the manufacturer.
• Light type: Modulated visible red light.
• Indicators:
  • Power on: Green LED.
  • Object detected: Yellow LED.
• Control elements: Sensitivity adjustment knob.
• Ambient light immunity: Not sensitive to ambient light

• Sensor type: Photoelectric, diffuse mode
• Manufacturer: Pepperl+Fuchs
• Housing: M18 cylindrical, nickel-plated brass
• Detection range: 0 to 200 mm
• Output type: 1 PNP output, light/dark switching, short-circuit protected
• Connection: 4-pin, M12 x 1 connector
• Light source: Infrared LED (IRED), 880 nm
• Switching frequency: 500 Hz
• Supply voltage: 10 to 30 V DC
• Protection rating: IP67
• Control elements: Sensing range adjuster

• -Diameter of the light spot: approx. 80 mm at 500 mm.
• -Operation indicator: LED green.
• -Switching type: light/dark on electrically switchable.
• -Ripple: 10%.

• Manufacturer: Pepperl+Fuchs
• Sensing mode: Diffuse mode sensor with background suppression (BGE). This allows it to detect objects within a specific range while ignoring backgrounds that are farther away.
• Series: ML100
• Detection range: 5 to 350 mm, which is adjustable.
• Output type: NPN, open collector.
• Light source: Modulated visible red LED light.
• Operating voltage: 10 to 30 V DC.
• Switching type: Light-on/dark-on changeover switch.
• Connection: 2-meter cable.
• Enclosure rating: IP67.
• Features:
  • Miniature design with full metal threaded mounting.
  • Highly visible LED indicators for power (green) and switching state (yellow).
  • The sensor is not sensitive to ambient light.

• Miniature housing: A compact design with all-metal threaded bushings.
• Adjustable background suppression: This function ignores objects in the background while detecting objects within a specific sensing range.
• Visible red light source: The bright, red transmitter LED simplifies installation and alignment.
• Highly visible status indicators: LEDs clearly show the power on (green) and switching state (yellow).
• Light/Dark switch: The switching type is adjustable and is set to "light-on" by default.
• Sensitivity adjuster: A control element for fine-tuning the detection range.
• PNP output: It has one PNP output that is protected against short-circuits and reverse polarity.
• Robust construction: It is not sensitive to ambient light and has an IP67 degree of protection against dust and water.

A P&F inductive sensor is a type of sensor used to detect the presence or absence of metallic objects. It works based on the principle of electromagnetic induction, where a changing magnetic field induces a voltage in a nearby conductor.

In P&F inductive sensors, an oscillator generates a high-frequency electromagnetic field around the sensing face. When a metallic object enters this field, it causes a change in the field which is detected by the sensor. The sensor then sends a signal to a controller or other device indicating the presence of the object.

P&F inductive sensors are commonly used in industrial automation applications for tasks such as position sensing, object detection, and proximity sensing. They are often used in harsh environments where other types of sensors may not be reliable, such as in areas with high temperatures, humidity, or vibrations.

A P&F inductive sensor is a type of sensor used to detect the presence or absence of metallic objects. It works based on the principle of electromagnetic induction, where a changing magnetic field induces a voltage in a nearby conductor.

In P&F inductive sensors, an oscillator generates a high-frequency electromagnetic field around the sensing face. When a metallic object enters this field, it causes a change in the field which is detected by the sensor. The sensor then sends a signal to a controller or other device indicating the presence of the object.

P&F inductive sensors are commonly used in industrial automation applications for tasks such as position sensing, object detection, and proximity sensing. They are often used in harsh environments where other types of sensors may not be reliable, such as in areas with high temperatures, humidity, or vibrations.

Overall, P&F inductive sensors offer a reliable and accurate solution for detecting metallic objects in industrial environments.

• Manufacturer: Pepperl+Fuchs
• Sensor type: Diffuse mode sensor
• Detection range: 0 to 1000 mm
• Adjustment range: 100 to 1000 mm
• Light source: Modulated visible red LED
• Output type: 1 PNP output (short-circuit and reverse polarity protected)
• Connection: 2-meter fixed cable
• Operating voltage: 10 to 30 V DC
• Switching current: Up to 100 mA (resistive load)
• Response time: 0.5 ms
• Switching frequency: 1000 Hz
• Features: Sensitivity adjustment and a light-on/dark-on changeover switch
• Indicators: Green LED for power on and a yellow LED for the switching state

• Sensing mode: The ML100-8-1000-RT/102/115 is a diffuse mode sensor, meaning the transmitter and receiver are in a single unit and the sensor detects objects by receiving light reflected off the target.
• Highly visible LEDs: Built-in LEDs show the power status (green) and switching state (yellow), providing clear operational feedback.
• Adjustable settings: This model includes a sensitivity adjustment control and a light-on/dark-on changeover switch, offering flexibility for different applications.
• Robust design: The sensor features a miniature housing with full metal threaded bushings for secure mounting and has an IP67 degree of protection against dust and water ingress.
• Light source: The sensor uses a visible red LED for its light source, which helps with easy alignment during setup.
• Ambient light immunity: The sensor is designed to not be sensitive to ambient light, ensuring reliable performance in various environments.
• Fixed cable: According to a technical data sheet from RS Online, this model is equipped with a 2-meter fixed cable