Techpace Solutions

The G6DS-1A-H 24VDC is an obsolete, high-sensitivity, 24 VDC coil, miniature power relay manufactured by Omron Electronics. It is a through-hole, PCB-mount relay with a single-pole, single-throw, normally open (SPST-NO) contact configuration. Key specifications

• Manufacturer: Omron Electronics Inc-EMC Div
• Series: G6DS
• Part status: Obsolete
• Mounting type: Through Hole (PCB)
• Contact form: SPST-NO (1 Form A)
• Contact material: Silver Nickel (AgNi)
• Coil voltage: 24 VDC
• Coil current: 5 mA
• Coil resistance: 4.8 kΩ
• Power consumption: 120 mW
• Contact rating (Current): 5 A
• Maximum switching voltage: 250 VAC, 30 VDC
• Maximum switching load: 1250 VA, 150 W
• Dimensions (L x W x H): 20.3 x 5.08 x 12.5 mm
• Seal rating: Sealed (fully)
• Operating temperature: -40°C to 85°C

he Omron G5Q-14-DC24 is a non-latching, miniature power relay in the G5Q series, featuring a single-pole double-throw (SPDT) contact form and a 24 VDC coil. It is a general-purpose relay suitable for various applications, including home appliances, industrial automation, and power protection. Specifications

• COil voltage: 24 VDC
• Coil type: Non-latching
• Contact form: SPDT (1 Form C)
• Contact current rating: 10 A
• Switching voltage (max): 277 VAC, 30 VDC
• Mounting type: Through-hole (PCB)
• Termination style: Solder pin
• Dimensions (L x W x H): 20.3 mm x 10.3 mm x 15.8 mm
• Operating temperature: -40°C to +105°C
• Contact material: Silver Alloy
• Seal rating: Sealed-Fully
• Dielectric strength: 5,000V AC (between coil and contacts)
• Approvals: CQC, CSA, UR, VDE

The number K8AK-PM2-20149 refers to the Omron K8AK-PM2, a three-phase monitoring relay used in industrial settings. The longer number is likely a variation of the base part number, but all product specifications reference the K8AK-PM2 model. Key functionsThe K8AK-PM2 is designed to protect equipment by monitoring a power supply for the following conditions: 

• Overvoltage and undervoltage: Detects when the voltage exceeds or falls below a set threshold.
• Phase sequence: Confirms that the phases of a three-phase power supply are in the correct sequence.
• Phase loss: Monitors for the loss of a phase in the system. 

Product specifications

• Manufacturer: Omron Automation and Safety.
• Application: Ideal for protecting industrial equipment and motors that use a three-phase power supply.
• Input voltage: Supports 3-wire and 4-wire, three-phase systems with voltage ranges from 220–480V AC.
• Output: Features two SPDT (Single Pole, Double Throw) output relays.
• Mounting: Designed for DIN rail installation.
• Width: The unit has a slim design, with a width of just 22.5 mm.
• Indicators: Equipped with LED indicators to show the unit's status, including power, relay output, and over/under voltage warnings.
• Timing: The contact actuation delay is adjustable from 0.1 to 30 seconds

The Omron G3TA-ODX02S is an I/O solid-state relay (SSR), which is a high-speed, electronically controlled switch designed for DC load switching in industrial automation settings. It features a built-in LED indicator to monitor operation. The specific model may include an input voltage of 12VDC or 24VDC. General specifications

• Product Type: Solid-State Relay (SSR), DC Output Module
• Manufacturer: Omron Automation and Safety
• Series: G3TA
• Output Switching Type: DC load switching
• Isolation: Photocoupler isolation
• Input/Output: Can be used as an input or output module in a multi-type configuration.
• Terminal Type: Plug-in terminal. Some models feature a quick-connect terminal.
• Mounting: DIN rail mountable.
• Indicator: Includes an operation display lamp.
• Compliance: RoHS Compliant. "-US" models are UL and CSA certified

The Omron G3TA-ODX02S is an I/O solid-state relay (SSR), which is a high-speed, electronically controlled switch designed for DC load switching in industrial automation settings. It features a built-in LED indicator to monitor operation. The specific model may include an input voltage of 12VDC or 24VDC. General specifications

• Product Type: Solid-State Relay (SSR), DC Output Module
• Manufacturer: Omron Automation and Safety
• Series: G3TA
• Output Switching Type: DC load switching
• Isolation: Photocoupler isolation
• Input/Output: Can be used as an input or output module in a multi-type configuration.
• Terminal Type: Plug-in terminal. Some models feature a quick-connect terminal.
• Mounting: DIN rail mountable.
• Indicator: Includes an operation display lamp.
• Compliance: RoHS Compliant. "-US" models are UL and CSA certified.

The Omron G9SA-301 AC/DC24 is a compact, expandable safety relay unit used in industrial automation to monitor safety devices like emergency-stop switches. It has a rated input voltage of 24 VAC/VDC and is certified for applications requiring a high level of safety. Key features

• Safety contacts: Features three normally-open (3PST-NO) safety contacts, which are used to control the power to machinery.
• Auxiliary contacts: Includes one normally-closed (1NC) auxiliary contact for signaling purposes, indicating the status of the safety circuit.
• Input options: Can be connected to either single or dual safety inputs, including emergency-stop switches or safety light curtains.
• Expandable: Expansion units with additional safety contacts can be connected to the base unit with a simple front connection.
• Mounting options: The unit can be mounted on a DIN rail or with screws for flexibility in installation.
• Safety rating: Certified up to Safety Category 4 and Performance Level PLe according to EN ISO 13849-1, a high standard for machine safety.
• Reset modes: Supports both automatic and manual reset modes.
• Monitoring: Includes External Device Monitoring (EDM) functionality to monitor external contactors

The Omron G9SA-EX301 is a compact safety relay expansion unit, designed to add extra safety outputs to a compatible master G9SA safety unit. It functions as an output module for industrial automation applications, and is primarily used for safety shutdown purposes. Key specificationsFunction: Output expansion module for G9SA safety relay units. It requires connection to a master unit, such as a G9SA-301, G9SA-501, or G9SA-321.Series: G9SA.Contact configuration: 3 normally open (NO) safety outputs and 1 normally closed (NC) auxiliary output.Supply voltage: 24 VDC.Contact rating: 5 A at 250 VAC or 5 A at 30 VDC.Operating time: The response time for the main contact to open is 10 ms maximum.Mounting: The unit can be mounted on a DIN rail.Terminals: It uses screw terminals for electrical connections.Dimensions: Approximately 17.5 mm (width) x 76 mm (height) x 111 mm (depth) It is notably thin compared to the 45 mm wide master units.Certifications: UL and CSA approved.Environmental compliance: RoHS compliant

The OMRON G9SE-221-T05 is a slim safety relay unit used in machine safety and industrial automation. It features two OFF-delayed safety outputs and one auxiliary output, making it suitable for applications like emergency stop switches, door switches, and light curtains. Features and benefits

• Compact size: With a width of just 22.5 mm, the G9SE-221-T05 saves space inside control panels.
• Intuitive LED indicators: The unit features LED lights that show the operating status of the inputs and outputs, which simplifies troubleshooting.
• Safety output: The relay has two dual-channel safety outputs with a maximum OFF-delay of 5 seconds, which can be configured via a preset switch.
• Easy installation: The G9SE-221-T05 can be mounted on a DIN rail and offers screw terminals for straightforward wiring.
• High reliability: It is equipped with standardized gold-clad contacts for reliable operation with both standard and microloads.
• High safety standards: According to Omron Europe, the product is compliant with major safety standards, including EN ISO 13849-1: PLe/Safety Category 4 and IEC 62061: SIL3

The OMRON G2R-1-SND-DC24(S) is a general-purpose power relay with a built-in LED indicator and a surge suppression diode. It is designed for use in control panels and industrial automation. SpecificationsAccording to distributor information, the specifications for the G2R-1-SND-DC24(S) relay are: 

• Coil voltage: 24 VDC
• Coil features:
  • Built-in LED indicator to show coil status
  • Built-in surge suppression diode to protect against voltage spikes
• Coil resistance: 1.113 kΩ
• Contact form: Single-pole, double-throw (SPDT or 1 Form C)
• Contact material: Silver alloy
• Contact current rating: 10 A
• Maximum switching voltage: 440 VAC and 125 VDC
• Terminal style: Plug-in quick-connect type
• Mounting: Socketable, compatible with DIN rail sockets
• Dimensions (L x W x H): Approximately 29 mm x 13 mm x 35.5 mm

Product features

• Built-in diode and LED: The included diode protects the circuit by suppressing coil surges, while the LED provides a clear visual indication of the relay's operational status.
• Space-saving design: As a slim-profile relay in the G2RS series, it is designed for applications where space is a concern.
• Socket compatibility: The plug-in terminal is compatible with specific OMRON sockets, such as the P2RFZ-05 and P2RF-05-PU, for secure and easy mounting.
• High endurance: The relay offers a long service life, with a mechanical endurance of 20 million operations and an electrical endurance of 100,000 operations at the rated load

The Omron G2RL-1-DC24 is a low-profile, non-latching, single-pole double-throw (SPDT) PCB power relay designed for general-purpose applications. It has a coil voltage of 24 VDC and is rated for a 12A current. SpecificationsAccording to distributor websites like DigiKey and Element14, the key specifications for the G2RL-1-DC24 relay are: 

• Coil Voltage: 24 VDC
• Contact Form: SPDT (Single-Pole Double-Throw), also known as 1 Form C
• Contact Rating: 12 A (at 250 VAC / 24 VDC)
• Mounting: Through-Hole (PCB Mount)
• Coil Type: Non-latching
• Seal Rating: Sealed with flux protection
• Dimensions (L x W x H): 29 x 12.7 x 15.7 mm
• Coil Power Consumption: Approximately 400 mW
• Ambient Temperature: -40°C to 85°C
• Insulation: Class F coil insulation

The "G2R2 24VDC" is a general-purpose, double-pole, double-throw (DPDT) power relay manufactured by Omron. It is identified by the model number G2R-2-DC24. The relay is activated by a 24V DC coil and has a contact rating of 5A. It is available in different terminal configurations for either printed circuit board (PCB) mounting or plug-in sockets. Specifications

• Manufacturer: Omron
• Coil Voltage: 24V DC
• Contact Configuration: DPDT (Double-Pole, Double-Throw)
• Contact Rating: 5A
  • Max Switching Capacity: 5A at 250V AC or 5A at 30V DC (resistive load)
• Coil Resistance: 1.1 kΩ
• Coil Power Consumption: 530 mW
• Mounting: Can be mounted directly onto a PCB using through-hole solder pins or plugged into a dedicated socket.
• Features: Some models include an LED indicator, diode, and a transparent case.
• Dimensions: Approximately 29 mm x 13 mm x 25.5 mm (for the PCB version).
• Operating Temperature: -40°C to 70°C.
• Terminals: Available with PC pins for soldering to a PCB or plug-in terminals for use with a socke

The Omron G7SA-4A2B DC24 is a 6-pole, forcibly guided safety relay. It features four normally-open (4PST-NO) and two normally-closed (DPST-NC) contacts, and a 24 VDC coil. It is certified for use in machine safety applications. Key specificationsAccording to datasheets from Omron and distributors like Farnell, Twittlebit, and DigiKey: 

• Contact configuration: 4 normally-open (4PST-NO) / 2 normally-closed (DPST-NC)
• Coil voltage: 24 VDC
• Rated load: 6 A at 250 VAC, 6 A at 30 VDC
• Contact material: Gold-plated silver alloy
• Terminal structure: PCB terminals (through-hole)
• Sealing: Flux-tight
• Features:
  • Forcibly guided contacts, which help avoid hazardous machine status by ensuring reliable operation of the safety circuit.
  • Conforms to EN/IEC 61810-3 and is UL/CSA and VDE certified.
• Operating temperature: -40°C to 85°C
• Life expectancy: 10,000,000 operations minimum (mechanical