Techpace Solutions

• Sensing type: Diffuse reflective
• Sensing distance: 40mm (based on a red LED from Autonics' BF4 Series amplifier)
• Minimum sensing target: Ø0.03mm, for opaque materials in an accurate output status
• Cable length: 2m
• Allowable bend radius: R15
• Free cut: Yes, with the use of a fiber cable cutter (Autonics FC-3)
• Operation temperature: -40 to 70°C
• Head type: Bolt type (standard)
• Thread: M3

• Sensing distance: 40 mm.
• Minimum sensing target: Ø0.03 mm.
• Type: Standard bolt type with M4 threading.
• Allowable bend radius: R15.
• Cable length: 2 m, with a free-cut cable design.
• Ambient temperature: -40negative 40−40 to 70∘C70 raised to the composed with power C70∘C.
• Associated amplifiers: Works with fiber optic amplifiers from the Autonics BF4 and BF5 series

• Type : Dual display
• Display method : 4-digit 7-segment LCD
• Light source : Red LED(660nm)
• Response time : 50㎲, 150㎲, 500㎲, 4ms, 10ms
• Power voltage : 12-24VDC 

Rotary encoders are used to electronically monitor the position of a rotating shaft by converting shaft rotation into electronic pulses. The encoder’s output pulses are counted and evaluated by a control unit to determine machine position and velocity, which provides exceptional accuracy and flexibility when controlling motion. High operating speed and system speed decreases the number of cycles and boosts overall productivity in manufacturing environment. Autonics rotary encoders are in various sizes and types to offer high quality and precise measuring of the operation position and speed of the rotating shaft, etc. for more precise control of the objects.

​The AUTONICS BS5 Series comprises ultra-compact photomicro sensors designed for precise object detection in constrained spaces. These sensors are particularly suited for applications in automation, robotics, and electronic equipment.​

Key Features

Sensing Method: Through-beam type (non-modulated)

Sensing Distance: Fixed at 5 mm

Target Object: Opaque materials, minimum size ≥ Ø0.8 mm × 2 mm

Response Time: Light ON: ≤20 µs; Dark ON: ≤100 µs

Response Frequency: 2 kHz

Light Source: Infrared LED (940 nm)

Operation Modes: Selectable between Light ON and Dark ON via control wire

Output Types: NPN or PNP open collector outputs

Power Supply: 5–24 VDC ±10% (Ripple P-P: Max. 10%)

Load Capacity: Max. 30 VDC, 100 mA; Residual voltage ≤1.2 VDC

Protection Features: Reverse polarity and output short-circuit protection

Indicator: Red LED visible from multiple directions

Environmental Resistance: Operating temperature: -20 to 55°C; Humidity: 35–85% RH

Durability: High shock and vibration resistance

Protection Rating: IP50

Material: PBT (Polybutylene Terephthalate)

Connection Options: Cable type or connector type​

Available Shapes & Models

The BS5 Series offers eight different shapes to accommodate various installation requirements:​

K-Type: Standard fork shape

T-Type: Thin body design

L-Type: L-shaped for corner installations

Y-Type: Y-shaped for specific mounting needs

V-Type: V-shaped for angled detection

F-Type, R-Type, TA-Type: Specialized shapes for unique applications​

Each shape is available with either NPN or PNP output and in cable or connector configurations. 

BS5-K1M: K-Type, NPN output, cable type

BS5-K2M: K-Type, NPN output, connector type

BS5-K1M-P: K-Type, PNP output, cable type

BS5-K2M-P: K-Type, PNP output, connector type​

• Type: Cylinder
• Sensing type: Diffuse reflective
• Sensing distance: 40 mm
• Minimum sensing target: A small object with a diameter of 0.03 mm.
• Allowable bend radius: R10.
• Cable length: 2 meters.
• Operating ambient temperature: -40°C to 70°C.
• Key accessories: Includes an adapter.
• Compatibility: Designed to be used with Autonics fiber optic amplifiers, such as the BF4 or BF5 series

• Sensing type: Diffuse reflective.
• Sensing distance: 400mm.
• Sensing target: Opaque and translucent materials.
• Light source: Red LED (660nm).
• Response time: Max. 1ms.
• Control output: PNP open collector.
• Housing material: Nickel-plated brass.
• Protection: IP67. 

• Power supply: 10–30V DC.
• Operation mode: Selectable between Light ON and Dark ON.
• Connection: 4-wire cable.
• Key features: High noise immunity and a mutual interference prevention function

• Sensing type: Diffuse reflective
• Sensing distance: 100 mm (BRQM100-DDTA) or 400 mm (BRQM400-DDTA), depending on the specific model.
• Sensing target: Opaque or translucent material.
• Light source: Infrared LED (850nm).
• Response time: Max. 1 ms.
• Power voltage: 10–30 VDC (±10%, ripple P-P: max. 10%).
• Control output: NPN open collector.
• Connection: Cable type (Ø4, 2m).
• Housing material: Nickel-plated brass.
• Protection: IP67 (IEC standard).
• Operation mode: Selectable Light ON or Dark ON via a control wire.
• Sensitivity: Adjustable via a sensitivity adjuste

• Display method : 4-digit 7-segment LED
• Control method : ON/OFF, P, PI, PD, PID
• Input specification : Thermocouple: K(CA), J(IC), E(CR), T(CC), B(PR), R(PR), S(PR), N(NN), C(TT), G(TT), L(IC), U(CC), Platinel II
  RTD: DPt100Ω, DPt50Ω, JPt100Ω, Cu100Ω, Cu50Ω, Nikel 120Ω
  Analog: 0-100mV, 0-5V, 1-5V, 0-10V
  0-20mA, 4-20mA
• Sampling cycle : 50ms
• Control output 1 : Relay(250VAC~ 3A)
• Option output : Alarm 1/2, RS485 comm.
• Power voltage : 100-240VAC~ 50/60Hz
• Protection structure : IP65(front panel)

• Display method : 4-digit 7-segment LED
• Control method : ON/OFF, P, PI, PD, PID
• Input specification : Thermocouple: K(CA), J(IC), E(CR), T(CC), B(PR), R(PR), S(PR), N(NN), C(TT), G(TT), L(IC), U(CC), Platinel II
  RTD: DPt100Ω, DPt50Ω, JPt100Ω, Cu100Ω, Cu50Ω, Nikel 120Ω
  Analog: 0-100mV, 0-5V, 1-5V, 0-10V
  0-20mA, 4-20mA
• Sampling cycle : 50ms
• Control output 1 : Current(DC0/4-20mA) or SSR drive(11VDC ) [ON/OFF]
• Option output : Alarm 1/2, RS485 comm.
• Power voltage : 100-240VAC~ 50/60Hz
• Protection structure : IP65(front panel)

• Input Voltage: 100 to 240 V AC or 90 to 350 V DC
• Output Voltage: 24 V DC (adjustable)
• Output Current: 5 A
• Output Power: 120 W
• Mounting: 35mm DIN rail
• Operating Temperature: -20°C to 70°C
• Life Expectancy: 10 years
• Weight: Approximately 565 grams
• Protection: Over-current, over-voltage, output short-circuit, and overheat
• Indicators: Green LED for normal output and red LED for low output voltage
• Protection Structure: IP20 (IEC standard)
• Dimensions: 40mm (width) x 122.2mm (depth) x 125mm (height) 

• High efficiency: The unit has an efficiency rating of 89% at 230 V AC.
• Power factor correction (PFC): The unit features built-in PFC, which helps to improve its efficiency and reduce power consumption.
• Compact size: The unit's small size saves space on the DIN rail and in control panels.
• Wide input voltage range: The unit's wide input voltage range (AC or DC) makes it suitable for a wide range of applications.
• Built-in protections: The unit's multiple protection features help to protect both the power supply and connected equipment. 

• Input voltage: 100–240 VAC or 90–350 VDC (with an allowable range of 85–264 VAC).
• Output voltage: 24 VDC.
• Output current: 2.5 A.
• Power output: 60 W.
• Mounting type: DIN rail.
• Indicators: Features an output indicator (green) and an output low voltage indicator (red).
• Protection features: Includes safeguards against over-current, over-voltage, output short-circuits, and overheating.
• Environmental rating: IP20. 

• Compact design: The SPB-A series is designed for space-saving installation.
• Secure connections: Uses rising clamp-type terminals for easy and secure wiring.
• Robust performance: Offers stable operation across a wide range of temperatures. 

The AUTONICS BS5 Series comprises ultra-compact photomicro sensors designed for precise object detection in constrained spaces. These sensors are particularly suited for applications in automation, robotics, and electronic equipment.​

Key Features

Sensing Method: Through-beam type (non-modulated)

Sensing Distance: Fixed at 5 mm

Target Object: Opaque materials, minimum size ≥ Ø0.8 mm × 2 mm

Response Time: Light ON: ≤20 µs; Dark ON: ≤100 µs

Response Frequency: 2 kHz

Light Source: Infrared LED (940 nm)

Operation Modes: Selectable between Light ON and Dark ON via control wire

Output Types: NPN or PNP open collector outputs

Power Supply: 5–24 VDC ±10% (Ripple P-P: Max. 10%)

Load Capacity: Max. 30 VDC, 100 mA; Residual voltage ≤1.2 VDC

Protection Features: Reverse polarity and output short-circuit protection

Indicator: Red LED visible from multiple directions

Environmental Resistance: Operating temperature: -20 to 55°C; Humidity: 35–85% RH

Durability: High shock and vibration resistance

Protection Rating: IP50

Material: PBT (Polybutylene Terephthalate)

Connection Options: Cable type or connector type​

Available Shapes & Models

The BS5 Series offers eight different shapes to accommodate various installation requirements:​

K-Type: Standard fork shape

T-Type: Thin body design

L-Type: L-shaped for corner installations

Y-Type: Y-shaped for specific mounting needs

V-Type: V-shaped for angled detection

F-Type, R-Type, TA-Type: Specialized shapes for unique applications​

Each shape is available with either NPN or PNP output and in cable or connector configurations. 

BS5-K1M: K-Type, NPN output, cable type

BS5-K2M: K-Type, NPN output, connector type

BS5-K1M-P: K-Type, PNP output, cable type

BS5-K2M-P: K-Type, PNP output, connector type​

​The AUTONICS BS5 Series comprises ultra-compact photomicro sensors designed for precise object detection in constrained spaces. These sensors are particularly suited for applications in automation, robotics, and electronic equipment.​

Key Features

Sensing Method: Through-beam type (non-modulated)

Sensing Distance: Fixed at 5 mm

Target Object: Opaque materials, minimum size ≥ Ø0.8 mm × 2 mm

Response Time: Light ON: ≤20 µs; Dark ON: ≤100 µs

Response Frequency: 2 kHz

Light Source: Infrared LED (940 nm)

Operation Modes: Selectable between Light ON and Dark ON via control wire

Output Types: NPN or PNP open collector outputs

Power Supply: 5–24 VDC ±10% (Ripple P-P: Max. 10%)

Load Capacity: Max. 30 VDC, 100 mA; Residual voltage ≤1.2 VDC

Protection Features: Reverse polarity and output short-circuit protection

Indicator: Red LED visible from multiple directions

Environmental Resistance: Operating temperature: -20 to 55°C; Humidity: 35–85% RH

Durability: High shock and vibration resistance

Protection Rating: IP50

Material: PBT (Polybutylene Terephthalate)

Connection Options: Cable type or connector type​

Available Shapes & Models

The BS5 Series offers eight different shapes to accommodate various installation requirements:​

K-Type: Standard fork shape

T-Type: Thin body design

L-Type: L-shaped for corner installations

Y-Type: Y-shaped for specific mounting needs

V-Type: V-shaped for angled detection

F-Type, R-Type, TA-Type: Specialized shapes for unique applications​

Each shape is available with either NPN or PNP output and in cable or connector configurations. 

BS5-K1M: K-Type, NPN output, cable type

BS5-K2M: K-Type, NPN output, connector type

BS5-K1M-P: K-Type, PNP output, cable type

BS5-K2M-P: K-Type, PNP output, connector type​

​The AUTONICS BS5 Series comprises ultra-compact photomicro sensors designed for precise object detection in constrained spaces. These sensors are particularly suited for applications in automation, robotics, and electronic equipment.​

Key Features

Sensing Method: Through-beam type (non-modulated)

Sensing Distance: Fixed at 5 mm

Target Object: Opaque materials, minimum size ≥ Ø0.8 mm × 2 mm

Response Time: Light ON: ≤20 µs; Dark ON: ≤100 µs

Response Frequency: 2 kHz

Light Source: Infrared LED (940 nm)

Operation Modes: Selectable between Light ON and Dark ON via control wire

Output Types: NPN or PNP open collector outputs

Power Supply: 5–24 VDC ±10% (Ripple P-P: Max. 10%)

Load Capacity: Max. 30 VDC, 100 mA; Residual voltage ≤1.2 VDC

Protection Features: Reverse polarity and output short-circuit protection

Indicator: Red LED visible from multiple directions

Environmental Resistance: Operating temperature: -20 to 55°C; Humidity: 35–85% RH

Durability: High shock and vibration resistance

Protection Rating: IP50

Material: PBT (Polybutylene Terephthalate)

Connection Options: Cable type or connector type​

Available Shapes & Models

The BS5 Series offers eight different shapes to accommodate various installation requirements:​

K-Type: Standard fork shape

T-Type: Thin body design

L-Type: L-shaped for corner installations

Y-Type: Y-shaped for specific mounting needs

V-Type: V-shaped for angled detection

F-Type, R-Type, TA-Type: Specialized shapes for unique applications​

Each shape is available with either NPN or PNP output and in cable or connector configurations. 

BS5-K1M: K-Type, NPN output, cable type

BS5-K2M: K-Type, NPN output, connector type

BS5-K1M-P: K-Type, PNP output, cable type

BS5-K2M-P: K-Type, PNP output, connector type​

The AUTONICS BS5 Series comprises ultra-compact photomicro sensors designed for precise object detection in constrained spaces. These sensors are particularly suited for applications in automation, robotics, and electronic equipment.​

Key Features

Sensing Method: Through-beam type (non-modulated)

Sensing Distance: Fixed at 5 mm

Target Object: Opaque materials, minimum size ≥ Ø0.8 mm × 2 mm

Response Time: Light ON: ≤20 µs; Dark ON: ≤100 µs

Response Frequency: 2 kHz

Light Source: Infrared LED (940 nm)

Operation Modes: Selectable between Light ON and Dark ON via control wire

Output Types: NPN or PNP open collector outputs

Power Supply: 5–24 VDC ±10% (Ripple P-P: Max. 10%)

Load Capacity: Max. 30 VDC, 100 mA; Residual voltage ≤1.2 VDC

Protection Features: Reverse polarity and output short-circuit protection

Indicator: Red LED visible from multiple directions

Environmental Resistance: Operating temperature: -20 to 55°C; Humidity: 35–85% RH

Durability: High shock and vibration resistance

Protection Rating: IP50

Material: PBT (Polybutylene Terephthalate)

Connection Options: Cable type or connector type​

Available Shapes & Models

The BS5 Series offers eight different shapes to accommodate various installation requirements:​

K-Type: Standard fork shape

T-Type: Thin body design

L-Type: L-shaped for corner installations

Y-Type: Y-shaped for specific mounting needs

V-Type: V-shaped for angled detection

F-Type, R-Type, TA-Type: Specialized shapes for unique applications​

Each shape is available with either NPN or PNP output and in cable or connector configurations. 

BS5-K1M: K-Type, NPN output, cable type

BS5-K2M: K-Type, NPN output, connector type

BS5-K1M-P: K-Type, PNP output, cable type

BS5-K2M-P: K-Type, PNP output, connector type

​The AUTONICS BS5 Series comprises ultra-compact photomicro sensors designed for precise object detection in constrained spaces. These sensors are particularly suited for applications in automation, robotics, and electronic equipment.​

Key Features

Sensing Method: Through-beam type (non-modulated)

Sensing Distance: Fixed at 5 mm

Target Object: Opaque materials, minimum size ≥ Ø0.8 mm × 2 mm

Response Time: Light ON: ≤20 µs; Dark ON: ≤100 µs

Response Frequency: 2 kHz

Light Source: Infrared LED (940 nm)

Operation Modes: Selectable between Light ON and Dark ON via control wire

Output Types: NPN or PNP open collector outputs

Power Supply: 5–24 VDC ±10% (Ripple P-P: Max. 10%)

Load Capacity: Max. 30 VDC, 100 mA; Residual voltage ≤1.2 VDC

Protection Features: Reverse polarity and output short-circuit protection

Indicator: Red LED visible from multiple directions

Environmental Resistance: Operating temperature: -20 to 55°C; Humidity: 35–85% RH

Durability: High shock and vibration resistance

Protection Rating: IP50

Material: PBT (Polybutylene Terephthalate)

Connection Options: Cable type or connector type​

Available Shapes & Models

The BS5 Series offers eight different shapes to accommodate various installation requirements:​

K-Type: Standard fork shape

T-Type: Thin body design

L-Type: L-shaped for corner installations

Y-Type: Y-shaped for specific mounting needs

V-Type: V-shaped for angled detection

F-Type, R-Type, TA-Type: Specialized shapes for unique applications​

Each shape is available with either NPN or PNP output and in cable or connector configurations. 

BS5-K1M: K-Type, NPN output, cable type

BS5-K2M: K-Type, NPN output, connector type

BS5-K1M-P: K-Type, PNP output, cable type

BS5-K2M-P: K-Type, PNP output, connector type​

• Sensing method: Through-beam type, which requires a separate emitter and receiver unit.
• Sensing distance: Up to 30 meters (98.43 feet).
• Light source: Red LED (660nm).
• Sensing target: Opaque materials with a minimum diameter of 15mm.
• Power supply: 10 to 30 VDC.
• Output type: PNP open collector, with selectable Light ON or Dark ON modes.
• Response time: Maximum 1ms.
• Protection rating: IP65, making it resistant to dust and water jets.
• Connection: 3-wire cable for the receiver and 2-wire cable for the emitter.
• Adjustment: Sensitivity can be adjusted using a built-in adjuster

• Pressure type: Compound pressure
• Applicable fluid: Air, non-corrosive gas
• Rated pressure range: -100 to 1,000 kPa (-0.1 to 1 MPa)
• Pressure port: Rear fitting, Rc1/8
• Connection: Connector type with a 2-meter cable
• Output: Selectable NPN or PNP open collector output (max. 100mA / 30V DC)
• Power supply: 12–24 V DC
• Display: Dual 12-segment LCD display for showing both the present value (PV) and the set value (SV)
• Display color: The PV display can show red, green, or orange depending on the setting.
• Protection structure: IP40
• Material: The front case is polycarbonate, the rear case is polycarbonate, and the pressure port is brass-nickel plated.
• Dimensions: 30 x 30 x 24.8 mm